Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Aurora, CO
Chimney cap and crown work in Aurora typically runs $285-$1,850 depending on whether we’re sealing surface cracks or installing a full multi-flue cap system. Most Aurora homeowners call us after spotting water stains on their ceiling near the fireplace or finding chunks of concrete on the roof after a Chinook wind cycle. We’re Level Two Chimney Co., and we send a camera down every flue before we quote anything in writing. Call (720) 439-4666 to book a Level 2 inspection.
Why Aurora Homes Are Different
Aurora’s housing map splits into two distinct inventories that fail in opposite ways. West of Havana Street, the 1950s-60s brick ranch belt along Colfax and Sixth Avenue carries original masonry chimneys with mortar joints that have survived sixty years of freeze-thaw spalling. East of I-225, the explosive growth along Smoky Hill Road and Hampden planted tens of thousands of factory-built zero-clearance fireplaces in 1970s-90s subdivisions. Those metal fireboxes were rated for 20-30 years and are now past design life.
At 5,400 feet, combustion runs cooler and less complete than at sea level. Stage-two creosote glazing builds faster than homeowners expect, even with seasoned wood. And Aurora’s exposed position on the High Plains means Chinook winds create erratic backdrafts that mask themselves as flue problems. We see it regularly: a homeowner calls for a sweep, and the real issue is a cracked crown letting pressurized wind force exhaust back down the flue.
Our Main Aurora Services
Most calls from Aurora fall into three categories. Here’s where to find each one:
Chimney Cleaning & Sweep in Aurora
We clean masonry and prefab systems across Aurora, from the original ranch chimneys in Hoffman Heights to the aging Heatilator boxes in Murphy Creek. Every sweep includes a camera-scan inspection and documented photo record under Haven Standard Clause 4. Chimney Cleaning & Sweep in Aurora covers our full process and what we find in local flues.
Chimney Repair in Aurora
Spalled brick, deteriorated mortar joints, and cracked crowns are standard findings on west-side masonry. In eastern subdivisions, we replace failed refractory panels and rusted chase covers. Chimney Repair in Aurora details our repair scope and how we document it.
Fireplace Services in Aurora
Prefab firebox rebuilds, gas-conversion prep, and damper repairs for both masonry and factory-built units. We stock replacement panels for common Heatilator and Lennox models used in Aurora’s 1980s-90s builds. Fireplace Services in Aurora lists what’s available.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Cap & Crown in Aurora
Chimney cap and crown work in Aurora addresses a specific pattern we document on nearly every west-side inspection: crown cracks that started as hairlines five years ago and are now spalling channels straight to the flue liner. The combination of concrete crowns poured without proper slope, plus Aurora’s 100-mph Chinook gusts and rapid freeze-thaw cycling, destroys crowns faster than in sheltered Denver neighborhoods. Our Chimney Cap & Crown hub explains the full Haven Standard approach; below is what we do most often in Aurora.
Crown Repair
Signs you need it
Water stains on the ceiling near the chimney, pieces of concrete on the roof, or a crown with visible cracks wider than a dime.
What it costs in Aurora
Crown repair in Aurora typically runs $285-$650 for crack sealing and resurfacing, while full crown replacement averages $850-$1,400.
How we do it
We grind out cracks to sound concrete, apply a bonding agent, and pour new crown material with a minimum 2-inch overhang and proper slope to shed water toward the roof.
Cap Installation
Signs you need it
Rust streaks down the chimney face, water in the firebox after snowmelt, or birds nesting in an open flue.
What it costs in Aurora
Single-flue cap installation in Aurora ranges $180-$425; multi-flue caps for larger chimneys run $450-$850 installed.
How we do it
We measure the flue or chimney top, fabricate or source a stainless or galvanized cap with proper mesh clearance, and secure it with masonry screws or a mounting skirt sealed with high-temp sealant.
What Chimney Cap & Crown Costs in Aurora
| Item | Typical range in Aurora |
|---|---|
| Crown crack repair / coating | $285 - $650 |
| Full crown replacement | $850 - $1,400 |
| Single-flue cap installation | $180 - $425 |
| Multi-flue cap system | $450 - $850 |
Can a cracked crown wait until next season?
Not safely in Aurora. Freeze-thaw cycles accelerate crack propagation, and Chinook wind-driven rain enters those channels directly. We document crown condition with photos and show you exactly what we’re seeing before you decide.
Do I need a cap if my crown looks fine?
Yes. A crown sheds water from the top surface; a cap blocks it from entering the flue entirely. In Aurora’s wind-exposed terrain, we find water intrusion in un-capped flues even on chimneys with intact crowns.
Chimney Liner & Rebuild in Aurora
Chimney liner and rebuild work in Aurora centers on two realities: the original clay flue tiles in 1950s-60s west-side ranch chimneys have survived sixty years of thermal cycling and often show vertical cracking or missing mortar joints, while the factory-built metal chimneys in eastern subdivisions were never designed for relining and frequently need full chase rebuilds when the inner liner fails. At 5,400 feet, incomplete combustion deposits acidic condensates that degrade liners faster than at lower elevations. Our Chimney Liner & Rebuild hub covers the full technical scope; here’s what we handle most in Aurora.
Stainless Steel Liner
Signs you need it
Flaking tile in the firebox, smoke odors when the furnace runs, or a home inspection flagging cracked clay flue tiles.
What it costs in Aurora
Stainless steel liner installation in Aurora ranges $1,850-$3,400 for a standard single-flue system.
How we do it
We run a camera to map flue condition, drop a correctly sized 316Ti stainless liner with proper insulation clearance, and connect it to the appliance with a listed adapter.
Partial Rebuild
Signs you need it
Leaning chimney above the roofline, extensive spalling on multiple courses, or mortar joints eroded to finger-depth.
What it costs in Aurora
Partial chimney rebuilds in Aurora typically run $1,200-$2,800 depending on height and access.
How we do it
We dismantle to sound masonry, salvage usable brick where possible, and rebuild with matching brick and Type N or Type S mortar appropriate to the original construction.
What Chimney Liner & Rebuild Costs in Aurora
| Item | Typical range in Aurora |
|---|---|
| Stainless steel liner (single flue) | $1,850 - $3,400 |
| Flexible liner for offset flues | $2,200 - $3,800 |
| Partial chimney rebuild | $1,200 - $2,800 |
| Full chimney rebuild | $4,500 - $8,500 |
Does every old chimney need a new liner?
Not necessarily. We camera-scan first and show you the tile condition. If clay tiles are intact with sound mortar joints, a liner may be unnecessary. We only recommend what the footage supports.
How long does a stainless liner last?
A properly installed 316Ti stainless liner carries a lifetime warranty from manufacturers like Olympia Chimney and typically outlasts the appliances it serves. We document installation with photos under Haven Standard Clause 4.
Brands We Service in Aurora
We stock and install caps, liners, and repair materials from HeatShield, Gelco, Olympia Chimney, and Famco through our Haven buying network. Most standard parts are on our Denver-area trucks, so Aurora jobs rarely wait for shipping. our brands
Pricing for Chimney Cleaning in Aurora, CO
| Service | Typical range in Aurora |
|---|---|
| Level 2 inspection with camera scan | $175 - $275 |
| Chimney sweep (masonry or prefab) | $225 - $325 |
| Crown crack repair / coating | $285 - $650 |
| Single-flue cap installation | $180 - $425 |
| Multi-flue cap system | $450 - $850 |
| Full crown replacement | $850 - $1,400 |
| Stainless steel liner (single flue) | $1,850 - $3,400 |
| Flexible liner for offset flues | $2,200 - $3,800 |
| Partial chimney rebuild | $1,200 - $2,800 |
| Full chimney rebuild | $4,500 - $8,500 |
Prices in Aurora run slightly higher than sea-level markets because high-altitude combustion produces heavier creosote loads that take longer to clean properly, and wind exposure complicates roof access. Every quote is delivered in writing before work starts, with scope, price, and warranty documented under Haven Standard Clause 1.
Neighborhoods We Serve in Aurora
We schedule Aurora appointments with route density in mind, so most customers book within 3-5 business days during peak season (September through November). Here are the areas we work most:
- Hoffman Heights (original 1950s ranch belt, masonry chimneys)
- Colfax corridor west of Havana (aging brick, frequent crown and liner issues)
- Smoky Hill Road corridor (1970s-80s prefab fireplace concentration)
- Murphy Creek and Hampden South (1990s zero-clearance units past design life)
- Tollgate Crossing and eastern subdivisions (prefab panel and chase cover failures)
Service Area - Cities Near Aurora
Our crews dispatch from the Denver office and cover the full metro corridor. We regularly work in Denver, CO for downtown and historic-district masonry, Englewood, CO for mid-century ranch stock, Westminster, CO for northwest-side subdivisions, and Littleton, CO for foothills-access homes with taller chimney exposures. Scheduling is coordinated from our Denver office for all locations.
Serving Aurora, CO - Our Local Coverage Area
We’re based in the Aurora area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Aurora
Most Aurora appointments are available within 3-5 business days during standard season, and we hold emergency slots for active water intrusion or blocked-flue calls. Live scheduling is available 24 hours a day at (720) 439-4666.
Some newer Aurora HOAs, particularly in master-planned communities along E-470, require advance notice for roof-access work. We provide a written scope and insurance certificate on request, but we do not handle HOA filing directly.
Structural rebuilds and liner alterations typically require an Aurora building permit; standard sweeps and cap installations do not. We pull permits when required and include the cost in your written quote.
Heat and humidity activate creosote deposits, and negative pressure in tightly sealed modern homes draws those odors down the flue. A proper sweep removes the source, and we can evaluate whether your damper seals adequately.
Softwoods like pine burn faster and cooler at 5,400 feet, accelerating creosote buildup. We don’t ban any seasoned wood, but we do see more frequent glazing in homes that burn primarily pine. Annual inspection is essential.
A written invoice with scope and price, a photo record of flue and exterior condition, and a summary of any recommended future work. All documentation is archived under Haven Standard Clause 4 and available on request.
Yes. We provide a written estimate after inspection, and we offer a Free Second Opinion on any competitor’s written quote. Call (720) 439-4666 to schedule.
Start with a Level 2 inspection. The camera scan shows exactly what’s happening in your flue, crown, and firebox, and we quote only what the footage supports. No guesswork, no pressure.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aurora Customers Say
"Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D."Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V.