Chimney Liner & Rebuild Cost - You See the Footage Before You Get a Price

Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

How Much Does Chimney Liner & Rebuild Cost in Littleton?

Chimney liner installation in Littleton, CO typically runs $1,800 to $5,500 depending on flue height, liner material, and what the camera finds inside. A partial chimney rebuild – crown, smoke chamber, and upper courses of brick – falls in the $1,500 to $4,200 range, while a full structural rebuild from the roofline up can reach $8,000 to $14,000 or more for a two-story home on Littleton’s older stock near South Platte Park or the W. Caley Avenue corridors. Most jobs are quoted in writing before a single tool comes off the truck – that’s not a selling point, it’s how we operate under every job we take.

Chimney Liner & Rebuild Cost Breakdown (2026)

These ranges reflect actual Littleton market conditions as of early 2026, including material costs routed through Haven’s buying network from suppliers like DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Labor rates in the south Denver metro have moved roughly 9-12% since 2023, which is reflected below. Your written estimate will itemize every line.

What drives the final number up or down?

The single biggest variable is what the camera actually finds. A flue that looks clean from the firebox can reveal cracked terra cotta tiles, offset joints, or active water infiltration the moment a lens goes down. In Littleton specifically, homes in the Ken Caryl Valley and the older Columbine neighborhoods – many built between 1968 and 1982 – frequently show mortar deterioration in the lower smoke chamber before any visible damage appears at the crown. That’s not speculation; it’s a pattern we’ve documented across thousands of inspections in this ZIP code area since 2009.

Flue height matters more than most homeowners expect. A ranch home in Highlands Ranch with a single-story chase might need 18 feet of liner. A two-story colonial near South Platte Drive could require 38 feet. The material difference alone is $600-$1,200 on a stainless job, more on a cast system. Liner diameter – 6 inch for most gas inserts, 8 or 10 inch for wood-burning fireplaces – adds another layer of cost variation.

Colorado’s climate does real work on Littleton chimneys. We average around 300 freeze-thaw cycles per year at the Front Range – more than Chicago, more than Minneapolis in terms of daily cycling rather than sustained cold. That cycling opens mortar joints, lifts flashing, and fractures terra cotta faster than in climates with steadier winters. By the time a homeowner in Bow Mar or Centennial notices a stain on the ceiling near the chimney breast, the liner may have been letting water in for two or three seasons already.

What Affects Chimney Liner & Rebuild Pricing in Littleton

• Liner type and material grade: Flexible stainless steel is the most common choice for Littleton homes converting to gas inserts. Cast-in-place systems cost more upfront but are the structurally correct answer when the masonry itself is compromised – not just the mortar. The difference in installed cost between these two approaches can be $2,000-$4,000 on the same chimney.
• Flue height and chimney configuration: Two-story homes in Ken Caryl Village and the Summerchase neighborhood regularly have flues running 30-40 feet. Every additional foot of liner is more material and more labor time at height. Offset flues – not uncommon in 1970s construction – require flexible liner systems and add installation time.
• Extent of masonry damage: Spalling brick (brick face breaking off from freeze-thaw expansion) on the upper courses versus structural failure through the smoke shelf and firebox are completely different scopes. A camera inspection makes this distinction clear before any price is written – which is why skipping the inspection to “save money” usually costs more in the end.
• Permit requirements: Jefferson County and the City of Littleton require permits for structural chimney rebuilds and new liner installations in most cases. Permit costs in this jurisdiction typically run $150-$400 depending on scope. We pull the permits; that cost is in your written estimate before work starts.
• Roof access and pitch: Steeper-pitched roofs – common on the Tudor and Colonial revival homes near West Roxborough Drive and the older Governor’s Ranch area – require additional safety setup. That adds $200-$600 in labor depending on pitch and height. We factor this into the written price, not after the job.
• Existing liner condition: If the original terra cotta tile liner is intact and dimensionally sound, a HeatShield resurfacing job can restore it to code at a lower cost than full replacement. If tiles are cracked, offset, or missing sections, replacement is the only appropriate answer – and the camera tells us which scenario we’re in on the first visit.

Before

After

How to Save on Chimney Liner & Rebuild

Get a camera inspection before you commit to any scope

The most expensive mistake we see in Littleton is homeowners who accept a verbal estimate based on a visual inspection from the firebox opening. A company that quotes you a liner job without a camera going down the flue is pricing the average job – not your specific flue. You could end up paying for a liner over a structurally compromised flue that needed parging first, or paying for a full rebuild when a resurfacing job would have passed inspection and served you for another 15-20 years.

Under Clause 4 of the Haven Standard, every Level Two visit includes a camera-down-the-flue inspection with a documented photo record. You’ll have the images. You’ll know exactly what’s there before a written price is placed in front of you.

Use our Free Second Opinion

If you’ve already received a written estimate from another Littleton chimney company, bring it to us. We’ll do a full Level 2 camera inspection, review the scope, and tell you – in writing – whether that estimate reflects what your chimney actually needs. No charge for the second opinion. We’ve seen $9,000 full-rebuild quotes on chimneys that needed $2,400 in liner work. We’ve also seen $1,800 liner-only quotes on chimneys that had active structural failure and needed a rebuild. Both scenarios end badly for the homeowner. Get the camera; get the facts.

Don’t defer maintenance to the point of full replacement

A crown with a hairline crack costs $350-$600 to repair. Left through two or three Littleton winters – each one cycling through freeze and thaw repeatedly – that crack admits water to the smoke chamber and mortar joints. Within a few seasons, the repair scope has grown from a crown job to a smoke chamber parging job plus upper course repointing plus possible liner damage. The $500 repair becomes a $3,500-$5,500 project. The math on annual cleaning and inspection is straightforward.

Schedule in the off-season

October through January is peak season for chimney work in the south Denver metro. Homeowners light their first fire, notice a problem, and call. If your project isn’t urgent, scheduling in late winter or spring (February through May) often means better scheduling flexibility. We don’t run seasonal pricing games – your written estimate is your price regardless of when the crew arrives – but earlier scheduling means the work is done before next season, not during it.

Ask for the written scope before you sign anything

Under Haven Standard Clause 1, you receive a written price, a written scope of work, and a written warranty before any work begins. Read the scope. If it says “liner installation,” confirm the liner type, gauge, insulation wrap inclusion, and what happens if the camera finds additional damage mid-job. A written scope protects you. If a company won’t put the scope in writing before the work starts, that’s your answer about whether to hire them.

Call (720) 439-4666 to schedule a free estimate on your our Chimney Liner & Rebuild services in Littleton. A live person answers – not voicemail, not a web form.

FAQs – Chimney Liner & Rebuild Cost in Littleton, CO

How much does chimney liner installation cost in Littleton, CO?

Chimney liner installation in Littleton runs $1,800 to $5,500 for most residential jobs, depending on flue height, liner material, and insulation requirements. Stainless flexible liners for gas appliances sit at the lower end; cast-in-place systems for structurally compromised flues are at the top. Your written estimate will specify the exact liner type, gauge, and installed length before any work starts. Call (720) 439-4666 for a free, camera-based estimate – no guessing from the firebox opening.

How much does a chimney rebuild cost in Littleton?

A partial rebuild – typically the upper courses of brick, crown, and cap – runs $1,500 to $4,200 in Littleton. A mid-structure rebuild from the roofline to the smoke chamber is $4,500 to $8,500. A full rebuild from the footing up on a two-story home can reach $8,000 to $14,000 or more. The extent of freeze-thaw damage to the mortar joints, the structural condition of the brick, and the flue configuration all affect where you land in those ranges. We determine the actual scope with a Level 2 camera inspection first – the written price follows from what the camera shows, not from a guess. Call (720) 439-4666 for a free estimate.

Does a chimney liner require a permit in Littleton, CO?

Yes, in most cases. Jefferson County and the City of Littleton require a permit for new liner installations and structural chimney rebuilds. Permit fees in this jurisdiction typically run $150 to $400 depending on the scope of work. We pull the permits as part of the job – the permit cost is included in your written estimate, not added as a surprise after the fact. If you’re in an unincorporated Jefferson County parcel near the Ken Caryl or Columbine Valley areas, requirements are the same; we verify jurisdiction before pulling.

Is it cheaper to repair or replace a chimney liner?

If the existing terra cotta tile liner is structurally intact – no cracked tiles, no offsets, no missing sections – a HeatShield cerfractory resurfacing job typically costs $1,400 to $4,800 and can extend liner life 15-20 years. A full stainless liner replacement runs $2,200 to $5,500 installed. So the repair-versus-replace decision isn’t always about upfront cost – it’s about what the camera shows. A resurfacing product applied over a cracked tile liner isn’t a repair; it’s a delay. The camera tells you which scenario you’re actually in. Call (720) 439-4666 to find out before you commit to either path.

How long does chimney liner installation take?

Most single-flue liner installations in a Littleton home take 4 to 8 hours from setup to cleanup. A cast-in-place system on a taller or more complex flue can run two days. A partial rebuild timed alongside liner work may extend the job to 1 to 2 days total. You’ll get a time estimate in your written scope before the crew arrives – and a text when they’re on the way, because that’s how every Level Two job runs.

What is the 365-Day Done Right Promise?

Every liner installation and chimney rebuild we complete in Littleton is backed by the 365-Day Done Right Promise: if it’s not done right within 365 days of completion, we make it right. That promise is stamped on the job documentation you walk away with – along with the photo record and written warranty required under the Haven Standard. It’s not a marketing line; it’s in the paperwork.

What You Get With a Level Two Chimney Estimate in Littleton

Before we quote a liner or a rebuild, a background-checked, uniformed technician runs an NFPA 211 Level 2 camera inspection down your flue. You’ll see the footage. You’ll get the photos. If there’s a cracked tile at the 22-foot mark or a corbeled smoke chamber joint that’s open to the interior, it’s documented – not described verbally and then forgotten.

The written estimate you receive specifies the liner type and gauge, the insulation wrap, any masonry work required, permit costs, and the warranty. No line reads “miscellaneous” or “additional work as needed.” If the camera finds something mid-job that changes the scope, we stop and show you before we continue. That’s Haven Standard Clause 1 – you have it in writing before work starts and before scope changes, full stop.

Our materials come from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, procured through Haven’s buying network to keep costs honest. We’re not sourcing from wherever the weekly discount lands – we’re using the same suppliers on every job, which means the quality in your flue is the same quality we documented in the 38,000-plus chimneys we’ve inspected and serviced since 2009.

If you’ve already got a written estimate from another Littleton chimney company, bring it. Our Free Second Opinion is a full camera inspection and written comparison – not a phone call from someone who hasn’t seen your chimney. If their price and scope are right for your situation, we’ll tell you that. If they’re not, you’ll have the camera footage to explain why.

For homeowners doing their research on Chimney Liner & Rebuild in Littleton, this pricing guide is the starting point – the estimate we write for your specific flue is the number that matters. And on the home page you’ll find the full picture of how every Level Two job is scoped, priced, and documented.

Key Takeaways

• Chimney liner installation in Littleton runs $1,800 to $5,500 installed; partial rebuilds run $1,500 to $4,200; full rebuilds can reach $14,000 on two-story homes.
• Every price range on this page reflects the current Littleton market, including permit costs and materials from named suppliers – not national averages.
• Colorado’s freeze-thaw cycling (approximately 300 cycles per year at the Front Range) accelerates chimney deterioration faster than most homeowners expect. Annual inspection is not optional maintenance; it’s damage control.
• Homes built 1965-1985 in Ken Caryl, Columbine Valley, and the Governor’s Ranch area show disproportionately high rates of smoke chamber mortar failure and upper-course spalling – a pattern documented in Level Two’s inspection records going back to 2009.
• A written price, written scope, and written warranty are delivered before any work starts on every job – Haven Standard Clause 1, no exceptions.
• The 365-Day Done Right Promise is on every job, in writing.
• A Free Second Opinion is available on any written estimate you’ve received from another company.
• Permits for liner and rebuild work in Jefferson County/Littleton run $150-$400 and are pulled by us – they’re in your estimate, not added later.

Ready for a Written Price?

Call (720) 439-4666 and a live person will answer – not a voicemail, not a callback form. Tell us what you know about your chimney (or nothing at all), and we’ll schedule a camera inspection and written estimate. There’s no obligation to proceed, and the Free Second Opinion offer stands if you’ve already got a quote from someone else. We operate in Littleton and across the south Denver metro, and every job starts the same way: camera down the flue, written price before we start, documented photo record when we’re done.

Pricing reflects the Littleton, CO market as of 2026. Written by Corrine Halstead, Owner at Level Two Chimney Co., serving Littleton since 2009.

Level Two Chimney Littleton offers free estimates – call (720) 439-4666.